Warning: file_put_contents(/www/wwwroot/www.1000114.com/index/temp_block/www.usitieee.com/ylexhmqjuhtml.php): failed to open stream: No space left on device in /www/wwwroot/www.1000114.com/index.php on line 107
川口友香川口友香,做I爱视频做I爱视频,美女视频写真美女视频写真

川口友香川口友香,做I爱视频做I爱视频,美女视频写真美女视频写真

发布日期:2021年02月26日
TF1 Sigma Filter
Product Code: 62414, 62415, 62417 Category: Filters

A high-performance, magnetic in-line system filter, the TF1 Sigma Filter is ideal for restricted spaces as it is capable of multiple orientations. This simple to install, composite plastic filter fits onto vertical and horizontal pipework, and works by allowing hydrocyclonic action to deliver contaminants to the unit’s powerful magnet assembly for safe removal.

Filters Sort
Product Code
Type
Size
62414
Slip Socket
22mm
62415
With Valves
22mm
62417
With Valves
28mm
  • Pressure tested, sealed unit
  • Unique action, capturing a range of magnetic and non-magnetic debris
  • Durable and robust construction, made from a high quality glass reinforced engineering polymer
  • Fast and easy to clean via drain valve
  • Easy to install – fits on horizontal and vertical pipework orientation
  • Will not block or restrict flow
  • 川口友香川口友香,做I爱视频做I爱视频,美女视频写真美女视频写真
    Engineered Polymer – The TF1 Sigma Filter is constructed from a high strength engineering polymer, suitable for heating and cooling system applications. The glass reinforced polymer has good hydrolysis resistance, as well as high resistance to strain and abrasion. The polymer is compatible with glycols and additives used in central heating systems. Low pressure loss – The TF1 Sigma Filter has been designed to ensure there is minimal pressure head loss in addition to maintaining a high collection efficiency. The internal HPS, magnet assembly and area of low flow have all been engineered to allow the filter to capture a range of system contaminates, whilst not impacting the rest of the heating system. High quality components – The TF1 Sigma Filter utilises a range of high-quality component parts that ensure the filter offers optimum performance. All valves are designed to allow users to operate them easily by hand, whilst also providing a secure connection to the system and a robust service point. The magnet is made using a premium grade of neodymium, enabling a high efficiency capture rate, as well as a robust filtration medium that will ensure a continued and consistent level of collection.
    Designed to be installed close to the wall, the TF1 Sigma Filter can be easily fitted into either horizontal or vertical pipework in both flow directions. The filter is designed to protect the boiler from the damaging effects of circulating corrosion debris, which has collected in the system as a result of a chemical reaction when water comes into contact with mixed metals used within a heating and cooling system. It can be installed on vertical or horizontal pipework, in accordance with the flow direction indicated by the arrow on the manifold. Ideally the filter should be fitted on the return to the boiler and can be installed at up to 45⁰ from the vertical position, if space or head height is restricted.
    As with all magnetic products, if you have an implanted cardiac device extra caution should always be taken when handling any magnetic filter. Individually packaged with instructions included. No special storage requirements.
    Suitable Fluids Water Inhibited Glycol Solutions Fernox Chemical Range / System Additives Maximum Percentage of Glycol 50% Maximum Working Pressure 50 L/min Maximum Working Temperature 100⁰C Capture Rate Up to 100% of system contaminates Operating Principle Contaminated water enters the filter via the manifold, carrying a variety of system debris and particulate matter held in suspension. This debris, including ferrous impurities such as Magnetite, moves through the manifold and into the main body of the filter. Due to the engineered flow characteristics created within the filter by the Hydronic Particle Separator, water is forced downwards, which helps to disrupt any dirt particles held in suspension. These particles then settle in the designated area of low flow at the base of the filter for easy removal. The dynamic flow of the water within the filter also allows ferrous impurities to be captured by the high-powered magnet assembly. Water is directed to pass over the magnet sheath and around the HPS, before exiting via the manifold. As a result, system debris cannot escape from the filter and is either trapped in the area of low flow, or captured by the powerful, neodymium magnet to allow clean water to exit the filter. Any dirt collected within the filter can be discharged by removing the magnet from the sheath and opening the drain valve. This procedure is shown in the cleaning guide.
    Filter Body – Glass filled, engineering polymer Manifold – Glass filled engineering polymer Drain Valve – Nickel plated brass Isolation Valves (if applicable) – Nickel plated brass Circlip – Stainless Steel Seals & Washers – EPDM

    There are no videos for this product.

    Take a look at some of our other videos by clicking here or get in touch with us.

    There are no FAQs for this product.

    Take a look at some of our other FAQs by clicking here or get in touch with us.

    There are no downloads for this product.

    Take a look at some of our other downloads by clicking here or get in touch with us.

    Filters Sort
    Product Code
    Type
    Size
    Single Unit Dimensions
    Single Unit Barcode
    Outer Carton Dimensions
    Outer Carton Barcode (ITF)
    62414
    Slip Socket
    22mm
    180 × 255 × 115 mm
    5014551624146
    241 x 178 x 268 mm
    50145510017010
    62415
    With Valves
    22mm
    180 × 255 × 115 mm
    5014551624153
    241 x 178 x 268 mm
    50145510017188
    62417
    With Valves
    28mm
    179 × 346 × 112 mm
    5014551624177
    241 x 178 x 352 mm
    50145510017256
    川口友香川口友香,做I爱视频做I爱视频,美女视频写真美女视频写真

    Newsletter

    © Fernox 2020. All rights reserved

    川口友香川口友香,做I爱视频做I爱视频,美女视频写真美女视频写真

    Country